AGREE Walk-In Chambers (Drive In)

IMV make some seriously large AGREE test chambers, supporting combined environment testing for whole vehicle/structure testing for the automotive and defence industry. Very large specimens can be tested using these systems, and the rooms can be built on-site to take advantage of available space (or limitations).

Both vertical and horizontal configurations are supported and the size is determined by your application.

Drive in chambers are also available where each wheel of the vehicle has its own vibration shaker, allowing for completely independent simultaneous vibration across the road surface. These systems are often employed for death-testing vehicle bodies due to the torsional forces they can apply.

AGREE Walk-In Chamber Features

AGREE chamber docking configurations

Docking can be provided using either direct coupling (top of shaker nested into the base of the chamber, or via a coupling shaft to transfer the vibration system out of the environmental chamber.

Any vibration shaker can be supported using the coupling shaft method, whilst the direct coupling requires protection of the upper section of the shaker.

Both horizontal and vertical shakers can be implemented.

Walk-in Combined Environment Test Chamber Specifications

All specifications are able to be customised, chambers are built-to-order to ensure what you receive is exactly what you need.

Model Number	SYN-6HA-40-VH
Internal dimensions	W4000×D2000×H2500mm
Temperature range	-40℃ - +120℃
Humidity range	30% - 95%RH
Temperature pull down time	+20℃ => -40℃ In 120 minutes (Curve gradient)
Temperature heat up time	-40℃ => +150℃ In 150 minutes (Curve gradient)
Cooling Type	Air Cooled