Thermal Shock Chamber (Liquid to Liquid)

Liquid-to-Liquid thermal shock chambers provide high levels of accuracy that are increasingly demanded in the pursuit of reliability in the field of car electronics and support systems.

Liquid-to-liquid type thermal shock testing is now attracting attention for its ability to impose higher thermal stress on specimens than “air-to-air” type testing, and by doing so delivering test results quickly. ESPEC has successfully developed liquid-to-liquid thermal shock chambers that satisfy the demand for lower running costs from brine and power consumption.

These thermal shock chambers also conform to EU vehicle standards that are compliant with IEC standards.

  • Conform to EU automotive testing standards that are compliant with global testing standards such as IEC 60068-2-14Nc.

  • Test area transfer time less than 10 seconds

  • A various mechanisms to reduce brine consumptions

  • Both single-fluid and dual-fluid brine applicable

 
 

Model Summary

Model Temperature range Basket dimensions / Outside dimensions (mm)
TSB-22 Hot bath: +70 to +200°C (+158 to +392°F)
Cold bath: -65 to 0°C (-85 to +32°F)
W120×H150×D120 / W1140×H1785×D1240
TSB-52 W150×H150×D200 / W1200×H1785×D1320
 

TSB Liquid-to-Liquid Thermal Shock Chamber Datasheet

Full specification: https://www.espec.co.jp/english/products/catalog/tsb.pdf

Liquid-to-Liquid Thermal Shock Chamber



Previous
Previous

Thermal Shock Chamber (Large Capacity)